3-In-1 Juice Filling Machine Full Automatic With 18000BPH
3-in-1 filling monoblock, combined with rinsing, filling and
capping. It is innovated and designed in the requirement of
non-carbonated energy drinks, juice, tea, on the bases of
introducing, digesting and absorbing advanced technology from
Germany and Italy.
Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° Along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.
Rinsing machine adopts Sunswell original overturn and double-opened
bottle clip. Bottle clip lock the bottleneck, the material of
bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive
droplet with 15° Angle ensures to wash all side of the bottle, and
can save the water.
The design of filling structure is reasonable and hygiene dead
angle, the run of equipment is stable, it can control the material
from the bottleneck, the control accuracy is within ± 2mm.
The filling valve material is SUS304
The filling system has liquid level automatic control.
Filling valve lift is controlled by the valve elevator, after
filling valve contact the bottleneck, it start to fill.
Bottle is conveying by the wheel in the filling part.
The juice or other hot beverage can be backflow by return tank to
control filling temperature.
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. Our
screw capping has following feature.
Bottle infeed and outfeed system
Touch screen: THINGET or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: Omron
Proximity switch: Omron
Other electrical components: Schneider
Pneumatic component: Airtac
Water pump: Nanfang
Main motor: Siemens
Working position: Rinsing 50, filling 50, capping 12
Rated capacity: 18, 000BPH (500ml) subject to beverage viscosity
Aseptic water rinsing pressure: 0.2-0.25Mpa
Water consumption: 3.6t/hr
Compressed air pressure: 0.7Mpa
Air consumption: 0.8m3/ min
Suitable bottle size: Diameter Φ50~Φ90mm, height 150~310mm
Main motor power: 9.2KW
Total power: 11KW
Overall dimension: 5300× 3800× 2700mm (L × W × H)
juice filling machine (Model)